Hi Alex,
Have you tried using BaseX XQJ 1.2.3 [1]?
I suggest downloading the zip file on the xqj.net site and giving Oxygen all of the jars contained within the zip.
The XQDataSource class you will need to use within Oxygen is "net.xqj.basex.BaseXXQDataSource", if you have further problems, please let me know.
Regards,
Charles
Hi Michael,
I'm seeing that I was doing things in a way that probably was not >
recommended.
I had:
- installed jetty sudo yum install jetty > 2. downloaded the war file to
/usr/share/jetty/webapps/BaseX73.war > 3. Create context xml here /usr/share/jetty/contexts/contexts/BaseX73.xml > 4. started the server cd /usr/share/jetty/ and java -jar start.jar
This gave me access through at 8080 and I've been loading data using curl calls without issue. I had been using the jar file standalone and so I >
thought using the war file in a similar way would be fine. I suppose it > might but I could not connect using oxygen this way.
I've since changed my approach to using the complete basex distribution >
although I've run into a few other issues. I suppose the first was that > oxygen was asking for woodstox-core jars so I downloaded those and added > them to the lib directory. Secondly the complete distribution doesn't come
with the basex-xqj-0.9.2.jar so I've put that into the lib with the other jars, it makes me wonder though if the instructions "Add the following
JAR > files above with the *Add* Button: xqj-api-1.0.jar, xqj2-0.0.1.jar and > basex-xqj-0.9.2.jar (the version names of the JAR file may differ) " are > accurate give only the first 2 files are included in the zip.
Finally now I'm getting an error "Description: Could not initialize class net.xqj.basex.bin.m" I'm not sure how to resolve this one although I >
assume I'm missing something.
I've started the server using the gui, loaded files into a db and used
the > gui server administration interface to start the server.
Thoughts?
Thanks Much > Alex
Hi Charles,
I downloaded those.
I'm starting fresh here this morning downloading the http://files.basex.org/releases/7.3/BaseX73.zip which I unzip in a folder, launch the gui and create a db with 3 xml files, close the gui and launch the server
Secondly I downloaded the http://xqj.net/basex/basex-xqj-1.2.3.zip and I've unzipped the 3 required jars into /opt/Oxygen XML Editor 14/lib/ and start oxygen
I configure the basex data source in oxygen and run an xquery. The first error message I get is E [BaseX] Provider com.ctc.wstx.stax.WstxInputFactory not found.
I resolve this error by downloading http://repository.codehaus.org/org/codehaus/woodstox/woodstox-core-asl/4.1.4... /opt/Oxygen XML Editor 14/lib/ folder and run the xquery again and get the following error
Engine name: BaseX Severity: error Description: org/codehaus/stax2/XMLInputFactory2
I run again not changing anything and get the error Engine name: BaseX Severity: error Description: Could not initialize class net.xqj.basex.bin.m
-- Oddly I restart oxygen run again and get the message that: E [BaseX] XQuery API for Java(XQJ) libraries are not present in file:/opt/Oxygen XML Editor 14/lib/ directory. Please check the XQuery section from the user manual for instructions.
And yet they are there in the folder and listed in the data source as follows file:/opt/Oxygen%20XML%20Editor%2014/lib/basex-xqj-1.2.3.jar file:/opt/Oxygen%20XML%20Editor%2014/lib/xqj-api-1.0.jar file:/opt/Oxygen%20XML%20Editor%2014/lib/xqj2-0.1.0.jar
Any ideas what I'm doing wrong here? Thanks Alex
On Fri, Nov 23, 2012 at 5:57 AM, Charles Foster charles@cfoster.net wrote:
Hi Alex,
Have you tried using BaseX XQJ 1.2.3 [1]?
I suggest downloading the zip file on the xqj.net site and giving Oxygen all of the jars contained within the zip.
The XQDataSource class you will need to use within Oxygen is "net.xqj.basex.BaseXXQDataSource", if you have further problems, please let me know.
Regards,
Charles
Hi Michael,
I'm seeing that I was doing things in a way that probably was not >
recommended.
I had:
- installed jetty sudo yum install jetty > 2. downloaded the war file
to /usr/share/jetty/webapps/BaseX73.war > 3. Create context xml here /usr/share/jetty/contexts/contexts/BaseX73.xml > 4. started the server cd /usr/share/jetty/ and java -jar start.jar
This gave me access through at 8080 and I've been loading data using
curl > calls without issue. I had been using the jar file standalone and so I > thought using the war file in a similar way would be fine. I suppose it
might but I could not connect using oxygen this way.
I've since changed my approach to using the complete basex distribution although I've run into a few other issues. I suppose the first was that >
oxygen was asking for woodstox-core jars so I downloaded those and added > them to the lib directory. Secondly the complete distribution doesn't come
with the basex-xqj-0.9.2.jar so I've put that into the lib with the other jars, it makes me wonder though if the instructions "Add the following
JAR > files above with the *Add* Button: xqj-api-1.0.jar, xqj2-0.0.1.jar and > basex-xqj-0.9.2.jar (the version names of the JAR file may differ) " are > accurate give only the first 2 files are included in the zip.
Finally now I'm getting an error "Description: Could not initialize
class > net.xqj.basex.bin.m" I'm not sure how to resolve this one although I > assume I'm missing something.
I've started the server using the gui, loaded files into a db and used
the > gui server administration interface to start the server.
Thoughts?
Thanks Much > Alex
Ahh. oxygen support figuring out it's not just me, read below..
Hello Alex,
Apologies for the late reply.
We haven't yet tested the .war variant of BaseX with Oxygen. So I can't yet comment on its specifics. However, I've just tried with the standalone BaseX-7.3 (Windows installer distribution) and can't get the current XQJ driver to work with Oxygen (This has previously worked with BaseX-7.0.2). I've configured an XQJ data source driver in Oxygen with the required jars(xqj-api-1.0.jar, xqj2-0.1.0.jar and basex-xqj-1.2.0.jar), but I keep getting: "E [BaseX7.3] Could not initialize class net.xqj.basex.bin.m" or if I add all the BaseX jars in the data source driver, I eventually get: "E [BaseX7.3] javax.xml.stream.XMLInputFacto ry.newFactory()Ljavax/xml/stream/XMLInputFactory;"
Note that, when validating, Oxygen will responds with an error like this: "E [BaseX7.3 Full] XQuery API for Java(XQJ) libraries are not present in file:/C:/Program Files/Oxygen XML Editor 14.1/lib/ directory. Please check the XQuery section from the user manual for instructions." That's an obsolete and misleading error message. You shouldn't copy any libraries to the Oxygen lib folder (that can cause a lot of problems with conflicting libraries), it should simply work with the XQJ jars configured in the data source driver.
We're still investigating what's going on. We'll let you know as soon as we have results.
Regards, Adrian
Adrian Buza oXygen XML Editor and Author Support
On Fri, Nov 23, 2012 at 10:04 AM, Alex Muir alex.g.muir@gmail.com wrote:
Hi Charles,
I downloaded those.
I'm starting fresh here this morning downloading the http://files.basex.org/releases/7.3/BaseX73.zip which I unzip in a folder, launch the gui and create a db with 3 xml files, close the gui and launch the server
Secondly I downloaded the http://xqj.net/basex/basex-xqj-1.2.3.zip and I've unzipped the 3 required jars into /opt/Oxygen XML Editor 14/lib/ and start oxygen
I configure the basex data source in oxygen and run an xquery. The first error message I get is E [BaseX] Provider com.ctc.wstx.stax.WstxInputFactory not found.
I resolve this error by downloading http://repository.codehaus.org/org/codehaus/woodstox/woodstox-core-asl/4.1.4... /opt/Oxygen XML Editor 14/lib/ folder and run the xquery again and get the following error
Engine name: BaseX Severity: error Description: org/codehaus/stax2/XMLInputFactory2
I run again not changing anything and get the error Engine name: BaseX Severity: error
Description: Could not initialize class net.xqj.basex.bin.m
-- Oddly I restart oxygen run again and get the message that: E [BaseX] XQuery API for Java(XQJ) libraries are not present in file:/opt/Oxygen XML Editor 14/lib/ directory. Please check the XQuery section from the user manual for instructions.
And yet they are there in the folder and listed in the data source as follows file:/opt/Oxygen%20XML%20Editor%2014/lib/basex-xqj-1.2.3.jar file:/opt/Oxygen%20XML%20Editor%2014/lib/xqj-api-1.0.jar file:/opt/Oxygen%20XML%20Editor%2014/lib/xqj2-0.1.0.jar
Any ideas what I'm doing wrong here? Thanks Alex
On Fri, Nov 23, 2012 at 5:57 AM, Charles Foster charles@cfoster.netwrote:
Hi Alex,
Have you tried using BaseX XQJ 1.2.3 [1]?
I suggest downloading the zip file on the xqj.net site and giving Oxygen all of the jars contained within the zip.
The XQDataSource class you will need to use within Oxygen is "net.xqj.basex.BaseXXQDataSource", if you have further problems, please let me know.
Regards,
Charles
Hi Michael,
I'm seeing that I was doing things in a way that probably was not >
recommended.
I had:
- installed jetty sudo yum install jetty > 2. downloaded the war file
to /usr/share/jetty/webapps/BaseX73.war > 3. Create context xml here /usr/share/jetty/contexts/contexts/BaseX73.xml > 4. started the server cd /usr/share/jetty/ and java -jar start.jar
This gave me access through at 8080 and I've been loading data using
curl > calls without issue. I had been using the jar file standalone and so I > thought using the war file in a similar way would be fine. I suppose it
might but I could not connect using oxygen this way.
I've since changed my approach to using the complete basex distribution although I've run into a few other issues. I suppose the first was that >
oxygen was asking for woodstox-core jars so I downloaded those and added > them to the lib directory. Secondly the complete distribution doesn't come
with the basex-xqj-0.9.2.jar so I've put that into the lib with the other jars, it makes me wonder though if the instructions "Add the following
JAR > files above with the *Add* Button: xqj-api-1.0.jar, xqj2-0.0.1.jar and > basex-xqj-0.9.2.jar (the version names of the JAR file may differ) " are > accurate give only the first 2 files are included in the zip.
Finally now I'm getting an error "Description: Could not initialize
class > net.xqj.basex.bin.m" I'm not sure how to resolve this one although I > assume I'm missing something.
I've started the server using the gui, loaded files into a db and used
the > gui server administration interface to start the server.
Thoughts?
Thanks Much > Alex
--
Alex G. Muir Software Engineering Consultant Linkedin Profile : http://ca.linkedin.com/pub/alex-muir/36/ab7/125 Love African Kora Music? Take a moment to listen to Gambia's - Amadu Diabarte & Jali Bakary Konteh www.bafila.bandcamp.com Your support keeps Africa's griot tradition alive... Cheers!
basex-talk@mailman.uni-konstanz.de
-
Alex Muir -
Charles Foster