- BaseX-Talk - mailman.uni-konstanz.de

Re: [basex-talk] strange behaviour of the BaseXgui-editor
by Rob Stapper 26 Oct '13

26 Oct '13

Hi, An update concerning problem 2 The problem occurs when I change the signature of one or more functions in an imported module. If there are too many functioncalls in my main program triggering an error because of this change in signature of the called function than the errorstatusmessages in the editor window get out of sync. An work around is to split the main program in a small first file and a large second file. After debugging the first file I copy an amount of new code from the second file into the debugged first file and start debugging the new copied code. This is repeated until all code is copied into the first part and the second part is empty. Resumé: It is not the size of the program that triggers the sync-problem with the errorstatusmessage but the amount of errors, which in a large program is higher than in a small program. Hope this helps solving the problem. Regards, Rob Stapper Van: Rob Stapper [mailto:r.stapper@lijbrandt.nl] Verzonden: zaterdag 26 oktober 2013 13:45 Aan: 'basex-talk(a)mailman.uni-konstanz.de' Onderwerp: strange behaviour of the BaseXgui-editor Hi, I encountered a few (3) problems with the BasexGui-editor. I use the 7.8 beta release but the issues also occur in previous versions. Problem 1: this is a minor problem but maybe related to problem 2 which is ( for me) a major problem: If I open two ( small) packages of which one has no errors and one has errors then the errorstatus-message at the bottom of the editor doesnt synchronize correctly when switching files. If I switch from the incorrect packagefile to the correct packagefile the errormessage doesnt refresh to ok until I edit this file. Even after closing an activated incorrect packagefile the errormessage stays active. Clicking on the message even reopens the incorrect packagefile. Switching the focus from the correct packagefile to the incorrect packagefile however, doesnt show this behavior. In that case the errorstatus-message changes to the appropriate errormessage of the incorrect file. Problem 2: which is a major problem when working with big files ( 80 kB) I found that when editing a large(r) packagefile the Basexgui-editor doesnt recognize errors that occur after a certain point in the file. If errors occur after this point the errorstatus-message shows ok but I know that the file contains errors and if I try to install the file as a package I get an window with the message below. If the error occurs before that certain point then I get an correct errormessage. However if I delete the code which contains the error the error-message remains. Clicking on the message brings the cursor to the point where the deleted code with the error used to be, even after saving and closing the file. Errormessage ============================================================================ ============================================== Improper use? Potential bug? Your feedback is welcome: Contact: basex-talk(a)mailman.uni-konstanz.de Version: BaseX 7.8 beta Java: Oracle Corporation, 1.7.0_45 OS: Windows Vista, x86 Stack Trace: java.lang.NullPointerException at org.basex.query.func.StaticFuncs.check(StaticFuncs.java:121) at org.basex.query.QueryParser.finish(QueryParser.java:312) at org.basex.query.QueryParser.parseLibrary(QueryParser.java:253) at org.basex.query.QueryContext.parseLibrary(QueryContext.java:197) at org.basex.query.util.pkg.RepoManager.installXQ(RepoManager.java:230) at org.basex.query.util.pkg.RepoManager.install(RepoManager.java:70) at org.basex.core.cmd.RepoInstall.run(RepoInstall.java:37) at org.basex.core.Command.run(Command.java:344) at org.basex.core.Command.exec(Command.java:320) at org.basex.core.Command.execute(Command.java:77) at org.basex.core.Command.execute(Command.java:89) at org.basex.gui.dialog.DialogProgress$1.run(DialogProgress.java:178) ============================================================================ ============================================== Being a responsible Basex-user I does what it says and give you some feedback J Problem 3: This is an old issue that I addressed e few months ago but which you could not reproduce. I found a new clue which might help you solving this issue. The issue was when working in fullscreen mode (F11) in the BasexGUI and then saving a file with save as The save-messagebox gets the focus but disappears behind fullscreen basexgui-window. This has something to do with using a dual monitorsystem. On a single monitor system it works ok: The save-box is placed on top of the fullscreen Basexgui-window and gets the focus. On a dualmonitorsystem the save-box is placed behind the fullscreen Basexgui-window and gets the focus. I hope this insight helps you tackle this minor issue. Well, thats all folk. I hope you can solve the editor-problem soon because I have a really hard time debugging my (large(r)) programs. Regards, Rob Stapper

1 0

parse-xml removes CDATA in text content
by Erdal Karaca 25 Oct '13

25 Oct '13

Hi all, When using parse-xml(-fragment), wrapping CDATA sections are removed and the text content within the original CDATA is returned. For example: parse-xml-fragment("<newNode><data><![CDATA[{cdata}]]></data></newNode>") returns <newNode> <data>{cdata}</data> </newNode> But I need this: <newNode> <data><![CDATA[{cdata}]]></data> </newNode> Do I miss something? Thanks!

3 6

Full Text Module - ft:search function
by John Best 25 Oct '13

25 Oct '13

Dear Christian, The syntax of the ft:search is - *ft:search($db as xs:string, $terms as item()*, $options as item()) as text()** In the $options part, I have seen various options like - Any Word, All Words, Phrase (for Exact Phrase), fuzzy and wildcards. These are really very good features. I am using them extensively. But one thing, I think, is missing and that is the Window/Distance Options for proximity search. Can these options be implemented.. ?? -- Have a nice day JBest

3 5

Re: [basex-talk] suppressing pre-evaluating information in evaluate-chapter in query-info window of BaseX-GUI
by Christian Grün 25 Oct '13

25 Oct '13

Hi Rob, looking forward to your demo (..so this only occur when you are running a large code base?), Christian 2013/10/25 Rob Stapper <r.stapper(a)lijbrandt.nl>: > Hi Christian, > > 1) I just downloaded the latest 7.8 beta release and this issue also occurs > in this version. > 2) The issue also occurs even if I don't interrupt the program. > 3) I'll see if I can reproduce this issue in a demo-program which I'll send > you later. The program where this occurs is about 200 kB including modules. > Maybe this is why the issue occurs. > > Btw. I do like the map:serialize instruction in 7.8 version. I sure helps my > debugging this 200kB monster. However a good debugger would help much more > ;-)) ( sorry, old cow but I couldn't resist ) > > Regards, > Rob > > -----Oorspronkelijk bericht----- > Van: Christian Grün [mailto:christian.gruen@gmail.com] > Verzonden: vrijdag 25 oktober 2013 10:53 > Aan: Rob Stapper > CC: BaseX > Onderwerp: Re: [basex-talk] suppressing pre-evaluating information in > evaluate-chapter in query-info window of BaseX-GUI > > Hi Rob, > >> When using a trace-instruction, like this: let $dum := trace( >> $local:programName, 'programmaNaam: '), in a Xquery program in the >> BaseX-GUI >> >> I get pre-evaluating information of some functions mixed with my trace >> output in the Query-Info-window, see below. > > The Info View will always return both the evaluation and compilation info. > However, the output should be clearly separated: > _________________________________ > > Interrupted. > Evaluating: > - programmaNaam: D03084 > > Compiling: > - pre-evaluating function($911 as element(when)) as map(*) { ... > _________________________________ > > Did the mixup occur with the latest version or snapshot? And does the > problem also occur when you don’t interrupt the query. And my last > question: could you provide us with a little sample query that demonstrates > the issue (you can use prof:sleep(...) to delay the output)? > > Thanks, > Christian > > > >> To be able to follow the programflow, I only want to see my >> trace-output, in this case the programName. >> >> Can I suppress this extra pre-evaluating query info? >> >> >> >> This for your reply in advance. >> >> >> >> Kind regards , >> >> Rob Stapper >> >> ====================================================================== >> ====================================================================== >> == >> >> QUERY INFO WINDOW >> >> Error: >> >> Interrupted. >> >> Evaluating: >> >> - programmaNaam: D03084 >> >> - pre-evaluating function($911 as element(when)) as map(*) { >> function($evaluateStatement.valuedBranche as element(when)) as map(*) >> { >> cobol:selection.valuedBranche.constructor(db:node-id($evaluateStatemen >> t.valuedBranche), >> koopa:evaluateStatement.object.Value($evaluateStatement.valuedBranche) >> , >> $nestedStatements.processor($evaluateStatement.valuedBranche/nestedSta >> tements)) >> }($911) } >> >> - pre-evaluating function($912 as element(when)) as map(*) { >> function($evaluateStatement.valuedBranche as element(when)) as map(*) >> { >> cobol:selection.valuedBranche.constructor(db:node-id($evaluateStatemen >> t.valuedBranche), >> koopa:evaluateStatement.object.Value($evaluateStatement.valuedBranche) >> , >> $nestedStatements.processor($evaluateStatement.valuedBranche/nestedSta >> tements)) >> }($912) } >> >> - pre-evaluating function($913 as element(when)) as map(*) { >> function($evaluateStatement.valuedBranche as element(when)) as map(*) >> { >> cobol:selection.valuedBranche.constructor(db:node-id($evaluateStatemen >> t.valuedBranche), >> koopa:evaluateStatement.object.Value($evaluateStatement.valuedBranche) >> , >> $nestedStatements >> >> >> >> >> _______________________________________________ >> BaseX-Talk mailing list >> BaseX-Talk(a)mailman.uni-konstanz.de >> https://mailman.uni-konstanz.de/mailman/listinfo/basex-talk >> >

1 0

suppressing pre-evaluating information in evaluate-chapter in query-info window of BaseX-GUI
by Rob Stapper 25 Oct '13

25 Oct '13

Hello, When using a trace-instruction, like this: let $dum := trace( $local:programName, 'programmaNaam: '), in a Xquery program in the BaseX-GUI I get pre-evaluating information of some functions mixed with my trace output in the Query-Info-window, see below. To be able to follow the programflow, I only want to see my trace-output, in this case the programName. Can I suppress this extra pre-evaluating query info? This for your reply in advance. Kind regards , Rob Stapper ============================================================================ ================================================================== QUERY INFO WINDOW Error: Interrupted. Evaluating: - programmaNaam: D03084 - pre-evaluating function($911 as element(when)) as map(*) { function($evaluateStatement.valuedBranche as element(when)) as map(*) { cobol:selection.valuedBranche.constructor(db:node-id($evaluateStatement.valu edBranche), koopa:evaluateStatement.object.Value($evaluateStatement.valuedBranche), $nestedStatements.processor($evaluateStatement.valuedBranche/nestedStatement s)) }($911) } - pre-evaluating function($912 as element(when)) as map(*) { function($evaluateStatement.valuedBranche as element(when)) as map(*) { cobol:selection.valuedBranche.constructor(db:node-id($evaluateStatement.valu edBranche), koopa:evaluateStatement.object.Value($evaluateStatement.valuedBranche), $nestedStatements.processor($evaluateStatement.valuedBranche/nestedStatement s)) }($912) } - pre-evaluating function($913 as element(when)) as map(*) { function($evaluateStatement.valuedBranche as element(when)) as map(*) { cobol:selection.valuedBranche.constructor(db:node-id($evaluateStatement.valu edBranche), koopa:evaluateStatement.object.Value($evaluateStatement.valuedBranche), $nestedStatements

2 1

Basex with Multithreading
by Erol Akarsu 25 Oct '13

25 Oct '13

I am working on crawling data. I can see it is taking a lot of time because xquery is pulling web pages one by one. But popular crawlers like apache Nutch has multithreading support so it can open multiple socket connections to multiple sites so that it can crawl very fast. Can we make add multithreading support basex? So it can run multiple xquery functions in parallel and then merge results? Initially, merging results can be done manually. At least, if we can distribute loads to different xquery functions, that would be great. Erol Akarsu

2 4

do not interpret text nodes as embedded expressions (Expecting '}' but found...)
by Erdal Karaca 23 Oct '13

23 Oct '13

Hi all, How can I process this query in basex: let $x := doc(<a>main(){int i = 0;}</a>) return replace value of node $x with "" There are text contents that contain, for example, c code with curly braces which I do not want to be interpreted as embeded expressions. As a workaround I could escape the curly braces, But, is there a better way/option to suppress interpreting text contents that look like embedded expressions? Thanks!

3 4

Out Of Main Memory error while creating BaseX DB
by elangovan MuthuSwamy 23 Oct '13

23 Oct '13

Hi All, I am using BaseX to evaluate Xpaths (Xqueries) for larger size of XML files. I have created BaseX database initially using *CreateDB*.execute(ctx) API. And every time when I need to evaluate Xpath I open database using Open("database name") API and get a context. Using this context I evaluate the xpath. Once I complete my evaluation I close the context using Close.execute(ctx) API. My application is running without any issues. If the server runs for few weeks, I have observed "Out Of Main memory error" while updating the BaseX database. Could any one please help me in this issue. Is there any possibility of memory leak in BaseX in my work flow? Note: I am using same CreateDB(...) API to update / overwrite the existing Database. XML file Size may vary from 3Mb to 10 Mb. -- Regards, Elango.

2 1

Cache compiled expressions for use with QueryProcessor
by Erdal Karaca 22 Oct '13

22 Oct '13

Hi all, We have lots of non dynamic (i.e. do not change at run-time) queries/expressions that are always parsed/compiled using a new QueryProcessor instance. How to cache compiled expressions for use with QueryProcessor? Or can we just cache QueryProcessor instances? If yes, are QueryProcessor instances thread-safe? Thanks!

2 4

java.nio.channels.OverlappingFileLockException
by EV Narasimham 22 Oct '13

22 Oct '13

Hi, I have 3 application modules. One module, creates the xml database, the second/third module execute queries on the database (no updates are being performed on the database). When the second and the third module try accessing the database, once module is able to query the database while the other module ends up with the below exception. org.basex.core.BaseXException: Improper use? Potential bug? Your feedback is welcome: Contact: basex-talk(a)mailman.uni-konstanz.de Version: BaseX 7.8 beta Java: Oracle Corporation, 1.7.0_25 OS: Linux, amd64 Stack Trace: java.nio.channels.OverlappingFileLockException at sun.nio.ch.SharedFileLockTable.checkList(FileLockTable.java:255) at sun.nio.ch.SharedFileLockTable.add(FileLockTable.java:152) at sun.nio.ch.FileChannelImpl.tryLock(FileChannelImpl.java:1017) at org.basex.io.random.TableDiskAccess.lck(TableDiskAccess.java:183) at org.basex.io.random.TableDiskAccess.sharedLock(TableDiskAccess.java:170) at org.basex.io.random.TableDiskAccess.<init>(TableDiskAccess.java:83) at org.basex.data.DiskData.init(DiskData.java:122) at org.basex.data.DiskData.<init>(DiskData.java:92) at org.basex.core.cmd.Open.open(Open.java:68) at org.basex.core.cmd.Open.run(Open.java:35) at org.basex.core.Command.run(Command.java:344) at org.basex.core.Command.exec(Command.java:320) at org.basex.core.Command.execute(Command.java:77) at org.basex.core.Command.execute(Command.java:89) Below are the options being set: context.globalopts.set(GlobalOptions.GLOBALLOCK, false) ; context.globalopts.set(GlobalOptions.PARALLEL, 1) ; //After referring to https://github.com/BaseXdb/basex/issues/574<https://github.com/BaseXdb/basex/issues/574> When the same exercise is being undertaken on a windows machine, the above behavior does not occur. Regards Narasimham <https://github.com/BaseXdb/basex/issues/574>

2 2